BIOLOGY ECOLOGY NOTES FREE

Hillary Kangwana

4 months ago

ECOLOGY

This term ecology is derived from the Greek word oikos which means a house or a place to live hence ecology is a branch of biology that deals with the study of relationships between organisms and their environment.

Concepts of ecology

Autecology – it’s the study which involves a single species.
Synecology – it’s the study of many species.
Biosphere – it’s the part of earth and atmosphere inhabited by living organisms. Also called ecosphere.
Habitat – this is the particular place in the environment where an organism is found. Habitats are categorized into terrestrial (land) habitats, aquatic (water) habitats.
Ecological niche– it’s the position that an organism occupies in a habitat.
Population – refers to all members of a given species in a particular time e.g. population of lions in Tsavo national park., in 2007
Community – refers to all organisms belonging to different species thatinteract in the same habitat e.g. pond, forest communities.
Ecosystem– it’s a natural unit composed of living and non- living components whose interactions result in a self sustaining system hence ecosystem is made up of communities.
Biomass– it’s the total dry weight of living organisms at a particular trophic level (feeding level) or per unit area e.g. total weight of maize crop per hectare.
Carrying capacity– it’s the maximum number of organisms an area can comfortably support without depletion of the available resources.
Factors in an ecosystem

They are divided into biotic and abiotic factors

Abiotic factors
They are non living environmental factors which affect the distribution of organisms e.g.

Light

Affect living organisms in terms of intensity, quality (wave length/ colour) and duration.
Light intensity and quality affect the rate of photosynthesis, flowering and germination in plants.
In animals affects migration, hibernation and reproduction e.g. lion hunts at dawn or dusk to avoid being seen by their prey.
A photographic light meter is used to measure intensity
Seechi disc measures light penetration in water.

N.B (i) at the top of the forest the trees form a continuous thick cover of leaves and branches called canopy. This canopy filters the light allowing only little light to pass through to the bottom of the forest. Some plants such as ferns, mosses and liverworts are found at the bottom of the forest.

(ii) Some types of plants grow on trees where they get enough light for photosynthesis. They are called epiphytes e.g. orchids.

Temperature

Biochemical processes of most animals function efficiently within a narrow range of temperatures.
Very low temperatures may inactivate enzymes
Very high temperature denatures enzymes.

Atmospheric pressure

It’s the mass exerted by air on the surface of earth.
Atmospheric pressure affects the amount of oxygen in the air.
At sea level the air pressure is high hence more oxygen available.
In high attitude areas the air pressure is low hence less oxygen available.

Humidity

This is the amount of water vapour in the atmosphere
At low humidity plants and animals lose a lot of water through transpiration and sweating respectively and the opposite is true at high humidity.
Wind
It increases the rate of water loss from organism.
In desert areas winds aid in formation of sand dunes which becomes the habitats for growth of desert plants.
Wind causes wave formation in lakes, ocean which enhances aeration of water.
It also disperses spores, seeds and influences dispersal and migration of flying animals.
Salinity
It’s the degree of salt concentration in water. Aquatic habitats are divided into three e.
–Fresh water habitat– has very little or almost no salt e.g. fresh rivers, lakes etc
-Marine– have high salt concentration e.g. ocean, seas etc
-Estuarine– found at the point where fresh water rivers join salt water lakes. Salt concentration depends on tides.
Salinity determines the type of organisms found in an ecosystem e.g. tilapia fish is found in fresh water habitats only while shark is found in salty water habitat like oceans.
PH
This is the degree of acidity or alkalinity. It influences the distribution of plants and animals in soil and fresh water ponds
Some plants thrive well in acidic conditions while others in alkaline or neutral conditions
Biotic factors
They are all the living organisms in an environment and their effects on each other.
Biotic interrelationships
Competition
This is where two different species require a common resource whose availability is limited. These resources include nutrients, space, light or mates
Competition between individuals of the same species is known as intraspecific while that between individuals of different species is known as interspecific competition.
In such competition for a limited resource, organisms with suitable structural and behavioural adaptations survive while others without such adaptations may die or migrate.
Competition is only found in organisms in the same ecological niche e.g. there may not be any competition between an elephant and a rabbit because they don’t depend on the same food.
Predation
This is the food relationship in which one organism kills another for food and feeds on it either wholly or in part.
Organism that kills another for food is a predator while the one killed is the prey.
Adaptations of predators
Structural adaptations
Rattle snakes locate their prey with special heat sensitive organs located near their eyes and they kill small birds and mammals by injecting them with toxins through their fangs.
Praying mantis has enlarged forelimbs with spikes for capturing its prey. It feedson small insects such as grasshoppers.
Birds e.g. eagles, hawks, kites have sharp eyesight, fast flight, modified beaks and talons.
Lion which preys on the antelopes has strong jaws with carnassial teeth, large claws on strong forelimbs and it is fast in movement.
Behavioural adaptations
Lion moves against the wind while stalking the prey.

ColourCamouflage

This involves the body colour of the organism blending well with the background environment to conceal the organism to a great extent e.g. the spotted pattern of the leopard blends well with the background colour of the bushes and trees concealing the leopard from the prey.
Adaptations of prey
Structural adaptations
Herbivores e.g. zebra have large eyes on the sides of the head which gives them a wide field of vision. This enables them to keep track of their enemies from far and therefore take precautions.
Antelopes and gazelles have swift movement to escape from predatorsBehavioural adaptations
A stick insect mimics a dry stick.
Confrontational display in porcupine.Colour Camouflage
The stripes of zebra and the spotted pattern of giraffe.
Predation brings about biological control e.g. if there were too many locusts destroying crops then several bird species that prey on them can be introduced into the habitat to reduce the locusts.
Parasitism
It’s the relationship in which an organism obtains nutrients from another live organism without killing it.
This organism which lives on or in another organism is called a parasite while the one from which nutrients are obtained is called the host.
When a parasite lives inside the body of the host it is called endoparasite g. tapeworms.
When the parasite lives on the outside of the host it is called ecto-parasiteg. ticks
Parasites weaken their hosts, cause or transmit diseases which may kill their host.
Symbiosis
This is association between organisms of different species in which both organisms benefit. e.g.

-Rhizobium bacteria which lives in the root nodules of leguminous plants.

The plants benefit from the nitrates fixed by rhizobium bacteria while bacteria benefit from shelter and carbohydrates provided by the plants.
-A lichen is an association between blue -green algae and a fungus. The algae carries out photosynthesis which provides the fungus with carbohydrates. The fungus provides the moisture and a place for attachment to the algae.
Saprophytism
This is a type of nutrition where organisms obtain nutrients from dead organic matter hence causing decomposition e.g. fungi and bacteria.
Decomposition releases nutrients into the ecosystem which are then made available to other living organisms.
Nitrogen cycle
It refers to the cycling of nitrogen and its compounds in nature.
Nitrogen is essential in the manufacture of proteins by organisms. Plants absorb nitrogen in the form of nitrates and assimilate it into plant proteins either by eating plants or other animals.
Nitrogen fixation is the process by which atmospheric nitrogen is converted into a form that can be utilized by plant by:

Biological nitrogen – fixation

It’s done by nitrogen fixing micro- organisms. These are ;
(i)Symbiotic nitrogen fixing- bacteria known as Rhizobium bacteria found in the root nodules of the leguminous plants.
(ii)Non- symbiotic (free living) bacteria found in the soil such as AzotobacterandClostridium
(iii)Some algae e.g. Anabaenachlorella and These organisms fix nitrogen into ammonia which is then converted to nitrates.
Non- biological nitrogen fixation – it’s achieved by lightening.
-During thunder storms lightning energy combines atmospheric nitrogen with O₂ to form nitrous acid and nitric acid. These are later converted to nitrates.
Nitrification
It’s the process of oxidizing ammonia formed from nitrogenous wastes contained in the decaying tissues. This is done by several nitrifying bacteria e.g.
Nitrosomonas and Nitrococcus – oxidize ammonia to nitrites (NO₂)
Nitrobacter bacteria which converts Nitrites (NO₂) into Nitrates (NO₃)
Denitrification
It’s the chemical process in which the nitrate in the soil are reduced to free nitrogen and released to the atmosphere. The organisms involved are Bacteria such as Thiobacillus, Pseudomonasand fungi.

Energy flow in an ecosystem

The energy from the sun is trapped by green plants for photosynthesis. Green plants are known as producers in an ecosystem.
Green plants are eaten by animals (herbivores) called primary consumers because they obtain chemical energy directly from the plants.
Herbivores are in turn eaten by carnivores (secondary consumers) e.g. dog.
The secondary consumers are eaten by tertiary consumers e.g. leopard.
When the leopard dies it is eaten by the vulture (quaternary consumer). These feeding levels i.e. producers and consumer levels are referred to as trophic levels.
When living organisms die, they are decomposed by bacteria and fungi which are referred to as
Food chains
It’s the flow of energy from producers to consumers in an ecosystem. It’s a linear representation of energy flow from a producer to other organisms.
There are three main levels that the energy must pass through in a food chain. They are referred to as trophic levels.
Trophic means nourishment hence they are also called nutritional levels. They are:
Producers – they are capable of making their own food by trapping energy from the sun.
Consumers – they depend on the producers for their food directly or indirectly e.g.

– Primary consumer – these are plant eating organisms e.g. filter feeders in water, herbivores and omnivores.

-Secondary consumers – small carnivores e.g. insects, spiders, lizards e.t.c.

-Tertiary consumers – large carnivores like lions, leopards, sharks e.t.c

Decomposers – it’s made of saprophytic organisms. They act on dead remains of organisms in all the other levels. When they are included in a food chain they are usually placed at the end.

N.B The amount of energy passed on by a trophic level to another is always less than the amount of energy that the trophic level received.

This is due to the loss and usage of energy e.g. some energy in animals is lost as heat energy in breath, urine and faeces

Energy flow in an ecosystem

NB The arrow in the food chain and food wed shows the direction of energy flow.

Examples of food chains

Grass Grasshopper Bird

Grass Grasshopper Bird Mongoose Wild dog

(Producer) (Primary consumer) (Secondary consumer) (Tertiary consumer) (Quaternaryconsumer)

Bacteria and Fungi

(Decomposers)

Food webs

It’s composed of all possible food chains in a given ecosystem i.e. it’s made of several interconnecting food chains
System of food chains that are linked to one another

NB In every ecosystem there are consumers that feed on dead organisms e.g. scavengers and detrivores.

Scavengers are carnivores that feed on dead bodies e.g. vultures, hyenas
Detrivores are organisms that feed on dead plant material which is undergoing decomposition e.g. termites, cockroaches, earthworms e.t.c
Ecological pyramids
They are diagrammatic representations that show the number of organisms, the amount of matter and energy at each trophic level in a food chain.
The producers are found at the base of pyramid followed by the primary, secondary, tertiary and quartenary consumers.
Ecological pyramids are important because they can be used to show the efficient use of energy in a community.

These pyramids are:

Pyramid of numbers
This shows the relationship between the numbers of the organisms that occupying the trophic level e.g.
In this way it is possible to know the number of organisms that are capable of transferring energy to the next level
The pyramid indicates that the organisms transferring energy to the next energy levels decrease as we rise up
The body size of organisms increases at each level from the base to the apex of the pyramid as their number decreases
At each trophic level much of the energy obtained is lost in respiration and thus fewer organisms can be supported at the succeeding level.
In some cases the number of organisms will not increase at each succeeding level e.g. many caterpillars feeding on one cabbage. It gives an inverted pyramid of numbers e.g.

Pyramid of biomass

The biomass of an organism is its constant dry weight
The producers have the highest biomass per unit area in decreasing order followed by primary consumers , secondary consumers, tertiary and quaternary consumers

Population

It is a group of organisms belonging to the same species in a particular habitat e.g. population of people in Utumishi academy
Characteristic of population

-Density – refers to the number of individuals per unit area e.g. 50 antelopes/km²

-Dispersion – this is the spread or distribution of organisms in a habitat.

-Population growth – refers to the rate of increase in numbers.

Population growth rate may be influenced by food availability, space, diseases, pests and predators

Population estimation methods

In order to find out the number of organisms in an ecosystem all organisms can be counted. But this is difficult and time consuming because:
(i) Some organisms are very too small or too many
Some organisms move from one place to another.
Some organisms may be poisonous or dangerous.
This problem is solved by taking representative samples from within the habitat.
A sample is a small number of individuals taken from a habitat that is representative of the whole population. Samples are used where the area to be studied is too big.
Sampling can be carried out using the following methods:

(1) Sampling methods

Quadrat method

A quadrat is a square frame of known area made of wood or metal. The standard quadrat is a square meter (m²) but small quadrats can be used if only a small area is being studied.
The quadrat can further be sub-divided into smaller squares by lengths of string or wire.
X
Procedure

(i) Select a suitable study area

(ii) Mark the study area and measure its size.

(iii)Stand in the middle of the study area, hold the quadrat aloft and throw it at random within the study area.

(iv)Where the quadrat lands identify and count all the living organisms enclosed within the boundaries of the quadrat and record the number of each species identified.

(v)Make several throws of the quadrats and repeat step (iv) for each quadrat thrown. Record your result in the table below.

(vi) Work out the average for each species from the total throws Specimen A=Total species No. of throws

=20+2+100+0+50+68=40

i.e. average number of specimen A in cm² is 40

(vii) Calculate the total population in the study area.

Example

Supposing that the area of the playing field is 5000m²and the average number of star grass per m² is 30. Calculate the number of star grass in the field.

If 1m² = 30

5000m²= 5000*30

=15,000 star grass

(b) Line transect method

It may be used to find out the distribution of species of plants in an area
A line transect is taken by running a rope across the plot and marking off equidistant points. Outs are made at each point (station). Only those plant along the line are identified counted and recorded
A line transect is particularly useful when studying transition in habitats and population through an area.
X

(c) Belt transect

A belt transect is taken by running two ropes parallel to each other and about 1m apart along the length of a plot. Counts are made between the two ropes at marked points
Capture – recapture method
This method is suitable for highly mobile animals like insects, birds, small mammals and fish.

Procedure

(i) Catch and mark as many organisms under study and record them as first marked (FM)
The animals are given time to disperse and mix with the remaining population for 24hrs. After 24hrs return to the habitat and capture as many organisms as possible.
Record the number of organisms collected as second capture (SC) and the number of those that were marked with paint i.e. marked recapture (MR)

P = FM X SC

Whereas

P – Total population

SC – second capture

FM – first marked

MR – marked recaptured

NB – the marking technique should not harm the animal or alter its behavior

Marking technique includes light coloured paint that is quick drying e.g. cellulose paint or coloured nail varnish.
For water animals the paint should be waterproof
Other methods include use of tags.

Assumptions made

No organisms move in or out of the area between the two counts.
The released animals mix freely with the remaining population.
The mark does not alter the animal’s behavior.
The marked animals will have enough time to mix with the rest.
The population number does not vary during the study period.

Example

To estimate the population size of mosquitoes in ASTU village, KEMRI researchers caught 400 mosquitoes which they marked and released. After 24hrs, 200 mosquitoes were caught out of which 80 had the marks. Estimate the population size of mosquitoes in the village.

P = FM X SC = 400*200=1000 mosqui

MR 80

The initial number of organisms captured is 75. The second captured is 200. The number of organisms recaptured is 50.

P = FM X SC= 75*200 =300

MR 50

(2) Aerial photography count

It involves photographing organisms from the air and counting them
The method is suitable for large animals that congregate in open spaces
(3)Census /direct counting/head count
This involves the direct count of members of a species in a given area
The method is suitable for large organisms in open areas like savannah grassland
Adaptations of plants to various habitats
Adaptation is change in an organism that increases its chances of survival in a specific environment.
These changes may be structural, behavioural or physiological.
Based on adaptations, there are 4 main groups of plants i.e.
Xerophytes
Helophytes
Hydrophytes
Halophytes
Xerophytes
They are plants adapted to withstand a dry habitat or to endure condition of prolonged drought as in arid and semi-arid areas.
Characteristics of dry habitats
Unpredictable and poorly distributed, rainfall – less than 250mm
Very high day temperatures but very low night temperatures resulting in high diurnal temperature range.
They are very windy
Adaptations of xerophytes to their habitats
High ability to absorb water from the soil.
Some plants have deep roots to absorb water from deep in the soil e.g. acacia tree.
Other plants have superficial roots which grow horizontally close to the soil surface to absorb water after a short or light shower of rain.
Many xerophytes have water storage tissues.
Some xerophytes such as Bryophyllum have succulent stems to store water. Other plants are Eurphobia, sisal, opuntia, aloe
Some xerophytes have a very short life cycle to evade drought hence some survive as seeds or underground perenating organs e.g. corms and bulbs.
The plants reduce their rate of transpiration by:
Some leaves have thick waxy cuticle to minimize the rate of cuticular transpiration e.g. sisal and aloe.
Some have hairs covering the surface of leaves hence trapping moisture e.g. Sodom apple
Some leaves are reduced in size such as scale like leaves of whistling pine (casuarina spp)or modified into spines as in cactus. This reduces the surface area over which transpiration occurs.
Shedding of leaves during drought to reduce surface exposed to transpiration.
Some leaves are folded or rolled up to ensure stomata are not exposed to environmental factors.
Most xerophytes show reduced number of stomata which are located on the lower epidermis that lowers the rate of transpiration.
Some have sunken stomata which accumulate moisture in sub- stomatal air spaces leading to low diffusion gradient thus reducing transpiration rate e.g. Nerium oleander.
Some xerophytes experience reversed stomatal rhythm (opening at night and closing them by day) to prevent excessive loss of water by transpiration.

(b) Mesophytes

These are plants growing under normal conditions of water supply or in well watered soils. They are found in savannah, rainforests e.t.c.
The habitats of Mesophytes have the following characteristics
Adequate rainfall i.e. 950mm – 1800mm that is well distributed throughout the year.
Relatively high humidity
Moderate to high temperatures with low diurnal range
Shallow water table.

Adaptations of Mesophytes to their habitat

Depending on where they grow in these habitats, they show various adaptations e.g.
In forest ecosystem
Trees grow tall due to competition for light
Climbers such as lianas have vines which twine on trees to reach the source of light while epiphytes support themselves on the branches of taller trees.
Others that cannot compete for light are adapted to photosynthesise under low light intensities by having numerous chloroplasts.
Majority show leaf mosaic that minimizes overlapping and over shadowing of leaves so that all leaves are exposed to light for photosynthesis.
Have broad leaves with thin cuticles and many stomata on both leaf surfaces to encourage high rate of transpiration.
Some have waxy and glossy surfaces to reflect the strong light rays and drip off rain water respectively.
Grassland
Long tap root system to reach the water table
Extensive fibrous root system to absorb rain water. Some are shallow rooted and thus develop buttress roots or prop roots for extra support e.g. Ficus natalensis
Needle like leaves to reduce the rate of transpiration
Fewer stomata on the upper leaf surface to reduce the rate of transpiration.
Shedding of leaves during the dry season.

(c) Hydrophytes

These are plants which grow wholly or partly in fresh water.
Their habitats are characterized by:
Low concentration of dissolved gases such as oxygen
Waves and currents are common
Less light under the water

There are 3 types of hydrophytes i.e.

Floating types
They include pista, salviniamolestus (water lettuce), duckweed, hyacinth and
Emergent types
They have roots for anchorage but their stem and leaves are extended to float on the water surface e.g. water Lilly
Sub merged types
They may be suspended in water or anchored at the bottom of the aquatic habitat e.g. ceratophyllum, elodea, spirogyra e.t.c.

Adaptations

Most emergent and floating types have broad leaves with maximum number of stomata on the upper surface. This provides a large surface area for gaseous exchange. The exposed stomata allow for quick loss of water through transpiration
Some sub merged hydrophytes have leaves which are deeply dissected into thread like straws in order to provide a large surface area for absorption of maximum light for photosynthesis.
Their leaves have numerous and sensitive chloroplasts that photosynthesize under low light intensities.
Have large air filled tissues (aerenchyma). The air gives buoyancy to the plants and also assist in gaseous exchange.
They have poorly developed roots that lack root hairs to reduce absorption of water.
Flowers are raised above the water to allow for pollination.
(d) Halophytes
These are plants which are able to tolerate very salty conditions in soil and marine water.
These habitats are characterized by:

-Low concentration of dissolved gases especially in marine water.

-Light intensity is low in marine water

-High concentration of mineral salts

Adaptations

Seaweeds grow close to the water surface where there is sufficient light for photosynthesis.
Submerged plants are able to carry out photosynthesis at low light intensity
Root cells concentrate a lot of salt to enable the roots absorb water by osmosis.
Mangroves have well developed prop and stilt roots for support.
Mangroves growing in mud flats have buttress roots for support.
Some like mangroves have pneumatophores (breathing roots) which emerge above water to obtain atmospheric oxygen for respiration.
The reproductive adaptations include floating fruits. The fruits have got large aerenchymatous tissue for air storage that makes them buoyant.

POLLUTION

Pollution is the addition of substances to the environment in quantities that are harmful to the organisms and distribute to an ecosystem.
Pollutants are substances that cause pollution. There are 3 main categories of pollution i.e air, water and soil pollution.

1.AIR POLLUTION

It refers to the contamination of air. The causes of air pollution include:

Sulphur based chemicals e.g. sulphur IV oxide (SO₂) and Hydrogen sulphide (H₂S).

They are produced by food preserving industries, manufacture of sulphuric acid and burning of sulphur based petroleum fuels.
Hydrogen sulphide is produced from mineral extraction , mine and also from geothermal power stations like olkaria
Volcanic activities also release hydrogen sulphide, carbon IV oxide and carbon II oxide (CO) into the atmosphere.
Effects
High concentrations of sulphur IV oxide leads to bronchitis, pneumon9ia and heart failure.
It also causes irritation and interfere with gaseous exchange
Sulphur IV oxide also dissolves in rain water and falls as acid rain which lowers the soil PH thus lowering the crop production.
Also acid rain corrodes metals such as iron and aluminium in buildings.
Acid rain also causes leaching of magnesium and calcium ions from the soils.
Hydrogen Sulphide poisons the organisms. It contaminates blood and suffocates victims when inhaled.

Oxides of nitrogen e.g. Nitrogen II Oxide (NO) and Nitrogen IV Oxide (NO₂)

These are produced from burning of petroleum fuels in industries and emissions of exhaust fumes in motor vehicles.
Effects
Nitrogen oxides dissolve in rain water forming acid rain.
They are also poisonous to animals affecting respiratory systems when inhaled
Nitrogen IV Oxide is carcinogenic
When trapped near the ground these gases seriously diminish visibility on roads.
Smoke and fumes
These contain carbon II Oxide (co), carbon IV Oxide (CO₂) and carbon particles. These are produced from industries which burn coal and petroleum fuels and from the burning of natural gases and charcoal.
Effects
Smoke and fumes affect the visibility due to “smog” on roads
When they settle on leaves they block the stomata hence hinder photosynthesis.
Smog also causes intense eye irritation, headaches and breathing difficulties
Carbon IV Oxide causes respiratory poisoning since it readily combines with haemoglobin forming carboxyhaemoglobin leading to O₂
CO₂ prevents layers of warm air from escaping into the upper atmosphere causing green house effect that leads to global warming.
Global warming leads to generally high temperatures that have caused the melting of snow on the peak of mountains such as Kenya and Kilimanjaro.
Dust
Its composed of small particles emitted from cement lime producing industries such as:
Cement works
Quarries
Road constructions
Dusty dry weather roads

NB A “wet method” of cement manufacture which does not result into the release of dust has been adopted by East African Portland cement Bamburi cement limited.

Effects
Dust settles on plants leaves hence limiting photosynthesis
It clogs the respiratory surfaces of organisms resulting in breathing difficulties and respiratory diseases.
Dust reduces visibility and irritates the eyes.

Lead

This is mainly from consumption of leaded petrol by motor vehicles. Lead is normally added to petrol to serve as anti-knock compound in vehicle engines so as to improve the engine combustion.

Effects

When inhaled it is absorbed into the blood stream and accumulates in the liver, kidneys and bones of animals affecting physiological functioning of these organs.

Leads is also thought to interfere with mental development of children.

In plants it leads to the blocking of stomatal pores making it difficult for the plants to carry out gaseous exchange hence no photosynthesis

(vi) Aerosols

An aerosol is a substance that consists of very fine particles of liquid or solid suspended in a gas e.g. pesticides, insecticides, fungicides, perfumes, air fresheners or spray paints.
The main pollutants in these aerosols are copper, lead and chlorofluorocarbon (CFC) compounds
Effects
When copper based aerosols are inhaled they cause irritation of respiratory organs of animals.
Copper also causes poisoning of water plants and fish.
Copper based chemicals are non-biodegradable hence tend to accumulate in the ecosystem.
CFCs are used in refrigerators and as propellants in aerosol cans such as perfume.
The main effect of CFCs is the depletion of the ozone layer leading to increased penetration of U.V radiation which causes skin cancer and affects crops

(vii) Noise

It’s the presence of undesirable sound in the atmosphere. It’s produced by machines in factories, heavy vehicles, aeroplanes, music players, loud speakers and juakali workshops.
Effects
Affects hearing in animals. Human beings become insensitive to low pitched sounds.
It’s an irritant and causes stress in animals.

Control of air pollution

Legislation- government needs to enforce the relevant legislative acts on environmental pollution.
Automobile should be fatted with filters and catalytic converters in their exhaust pipes to reduce emission of oxides of nitrogen, sulphur and carbon.
Industries manufacturing sulphuric acid and nitric acids should have long chimneys fitted with scrubbers e.g. solar and wind energy
Use CFC free aerosols and appliances
Use of biological control methods to control pests, diseases and weeds. This reduces reliance on biodegradable chemicals.
Encourage use of public means of transport as much as possible other than private cars, this minimizes consumption of fossil fuels and emission of gas pollutants.
Smoking in public should be abolished.
Ear muffs should be used in factories and juakali workshops that generate loud noises.
The masses should be educated on the need for sustainable environmental management.
The government should be signatory to global treaties on environmental conservation

WATER POLLUTION

It is the addition of substances into the water bodies in quantities that are harmful to the living organisms’ dependent on that water.

Sources of water pollution

Domestic effluents-untreated sewage from urban centers gets discharged into rivers used for water supply for domestic purposes.

This sewage contains disease causing micro-organisms such as bacteria, viruses and protozoa. It’s also full of faecal material and urine which encourage bacterial growth. Kitchen wastes also contain detergents that have a lot of phosphates.

Effects

Water pollution may cause epidemics of water –borne diseases e.g. cholera, typhoid and amoebic dysentery.
The faecal material is broken down by saprophytic bacteria and fungi which lead to depletion of dissolved oxygen in water. This in turn affects aquatic organisms such as fish and aquatic plants.
Decomposition of wastes also releases nutrients into the water which causes rapid growthof water hyacinth e.g. L.victoria. This enrichment of the lake with nutrients and its effects is called eutrophication.

Industrial effluents

Industries discharge various effluents into rivers,dams e.t.c.. The effluents contain toxic metallic compounds of mercury,arsenic and cadmium in addition to acids and other chemicals.

Effects

The poisonous compounds directly kill aquatic organisms such as fish.
This compound enter the food chain and accumulate tolethal levels in organisms higher up the trophic levels
Heat
Industries discharge hot water directly into the water bodies. Some of the effluents may react among themselves releasing heat into the water

Effects

Heat reduces the amount of dissolved gases in water e.g. oxygen and carbon dioxide thus organisms may die from oxygen deficiency.
The hot water may even kill the living organisms directly due to the high temperatures.

Oil Spillage

Oil spillage occur in oceans from oil tankers accidents,
Marine organisms such as fish are killed by clogging on their respiratory surfaces.
Marine birds get their feathers clogged hence have difficulty in flight.
Oil coats photosynthetic phytoplankton’s till they die.
There is reduced light penetration into the water hence photosynthesis of submerged plants is hindered

Agrochemicals

They includeinorganic fertilizers, herbicides, and pesticides.
The inorganic fertilizers contains phosphates and nitrates
Pesticides may contain heavy metals e.g. mercury and copper.other pesticides such as DDT contains CFC which are not easily broken down biologically(non-biodegradable)

Effects

Most of these chemicals contain heavy metals such as copper and mercury which affect respiratory activities of aquatic organisms.

These chemicals accumulate in the body over a long time and reach toxic levels leading to death
Nitrates and phosphates in fertilizers cause eutrophication

Lead

This is water pollutant mainly from pipes and tanks in domestic water supply system. through run-off it finds its way into water bodies like rivers, lakes and oceans

Mercury

It’s a pollutant released by industries that manufacture chlorine, sodium hydroxide oves and vinyl plastics.
Also released during combustion of coal and petroleum oils
Fungicides and some cosmetics also contain mercury

Effects

Methyl mercury is volatile and very toxicit is absorbed by aquatic organisms or though leaves hence entering the food web involving human beings animals eating plants will mercury are poisoned and killed
Mercury poisoningin people results in accumulation of mercury in liver, kidney and brain affecting the physiological functioning and eventually causes death.
Mercury also interferes with the process of melaline formation leading to skin lighting , blindness paralysis and even death
SOIL EROSION
Silt is transported into water bodies

Effects

It makes water unclean and unfit for human consumption
The silt reduces light penetration hence hindering photosynthetic activities.
It clog the respiratory surfaces of aquatic organisms e.g. gills in fish stomata in plants. This interferes with gaseous exchange.

Control of water pollution

Legislation- relevant legislation should be enforced and provide for heavy penalties.
Industries should control or treat the industries effluents before discharging into water bodies.
Proper treatment and disposal of sewages there should be separate systems for disposal of sewage and drinking water.
Latrines should be constructed and properly used in addition to proper personal hygiene to control diseases causing agent.
Encourage use of unleaded fuels
The public should be educated on correct use of inorganic fertilizers and pesticide to be used and should offshore oil wells and refineries.

Effects

Oil layer on the water surface reduces oxygen supply to the water and this may lead to death of aquatic life forms.
be encourage using organic farming which biologically control pest.
Appropriate soil control methods to be put in place such as building of gabions.

3.SOIL POLLUTION

This is where chemicals are discharged into the soil and accumulate to levels that cause harm to soil organisms
Sources of soil erosion

Oxides of sulphur –e.g. surphur IV oxide enter the soil through precipitation as acid rainfall acid rain alters the soil ph therefore affecting plants and animals that cannot tolerate acid soil

Aerosols

Most aerosols sprayed to control pest and disease in plants and animals contain heavy metals e.g. copper and mercury
The chemicals fall on the soil and are taken up by plants where their concentration increases and lead to the death of animals.
Petroleum products
They are spilled on land e.g. oil tankers. Some organisms fail to obtain oxygen in soil saturated soil and therefore die

Inorganic fertilizers

Contain phosphate and nitrates which increase soil acidity so that the soil micro organism cannot inhabit such soils

Solid waste

Community household waste and industrial wastes.
Some are biodegradable e.g. food residue, oil clothing and papers. Others are non- biodegrable e.g. rubber plastic containers scrap metals and glass bottles
Solid wastes are a nuisance and may also be injurious e.g. glass bottles.
They destroy the aesthetic state of the environment
They offer breeding grounds for pests rodents and insects vectors which pose a health hazard to human beings
The non-biodegradable solid wastes limit soil aeration thus inhabiting micro-organisms activities

Control of soil pollution

Recycle solid waste e.g. polythene paper and plastic containers, glass bottles paper and scrap metal.
Household wastes that are biodegradable can be disposed in a compost pit to form compost manurefor organic farming.
Combustible soil waste e.g. oil cloths sanitary towels hair should be burned in incinerators
encourage pipeline transportation of petrol and petrol products to minimize risk of spillage
discourage the excessive use of agrochemicals
biological control of pests and diseases to be encouraged
enforce appropriate legislation on proper solid wastemanagement 4.RADIOACTIVE EMISSION
Nuclear energy is based on the destruction of atom of matter to release energy. The form in which this energy is released when atoms are broken down is generally called radiation. such radiations have great power and it is very destructive if it leaks accidentally
The industries in which this energy is produced are called radioactive or nuclear reactors. Some of the common substances broken down to release nuclear energy are uranium, radium, germanium, plutonium, Hydrosonium (heavy water

HUMAN DISEASES

A disease is a disorder state of a tissues, organ system or organism during which its function is not carried out normally.

Bacterial diseases

They are caused by bacterias e.g.

Cholera

Cause Vibrio cholerae

Mode of transmission

It’s a waterborne disease. Epidemic of cholera are common during floods.
It’s transmitted through contaminated human feaces and food.
Its spread by houseflies which feed on both contaminated faeces and human food.
Incubation period is spread few hours to 6 days.

Symptoms

The bacteria reach the intestine and multiply rapidly.
They secrete an enzyme called mucinase which digests the inner lining of the intestines. The exposed intestinal wall becomes irritated and damaged by the produced by the bacteria and this causes violent diarrhoea and vomiting accompanied by severe abdominal pains.
Leads to general body dehydration occurring to the high frequency of defecation accompanied by loss of large quantities of water.
Death can occur within 24 hours of infection in extreme cases.
Adaptive characteristics
Adaptive characteristics are the structural and functional mechanisms which make a parasite be better suited to its environment.
They form cysts that remain dormant for sometime.
They can survive outside the body of the host.
Can survive in areas of low oxygen concentration like that in the small intestines.

Prevention and control

Treating patients using antibodies.
Isolating the patient especially during an outbreak.
Disposing faeces properly in toilets and latrines discouraging the practice of “flying toilets”(deface in plastic bags which are then thrown into water dumps or rooftops).
The toilets and latrines should be cleaned daily with disinfectants. The latrines should be located far from water sources such as wells and boreholes.
Boiling drinking water.
Cooking food properly before it is eaten
Washing fruits and vegetables properly before eating.
Killing houseflies using insecticides.

Covering food properly before storing it.

Vaccinating people against the disease in areas prone to cholera. The vaccine is effective for 6 months only.
Proper treatment and disposal of sewage.
Typhoid
Cause: Salmonella typhi
Mode of transmission
It’s a food and water-borne disease.
It can also be transmitted through sweat and saliva droplets.
Its spread by houseflies and cockroaches and salmonella bacteria is found in the intestines, lymph nodes.
Symptoms
Fever
Flu
Headache
Abdominal pains
Vomiting
Throat infections
Dry cough
Diarrhea
Dehydration

Adaptive characteristics

They survive in contaminated water for a long time.
The have many alternative host such as pigs, cattle and poultry hence the chance of infecting human being is high.

Prevention and Control

To treat patient with antibiotics
Proper disposal of feaces and urine in toilets and latrines.
Boil drinking water.
Cook food properly before serving it.
Wash vegetables and fruits in treated water before eating them.
Kill houseflies and cockroaches using insecticides.
Food should be properly covered before storage.
Proper treatment and disposal of sewage.
People can be vaccinated against typhoid[effective for 3 yrs]

Protozoan diseases
Malaria

It’s caused by a plasmodium. The four types of plasmodium are :Plasmodiummalariae
Plasmodium vivax
Plasmodiumovale
Plasmodium falciparum
Mode of transmission
Plasmodium parasites live in a female anopheles mosquito and in human beings. The male anopheles mosquito feeds on the sap of plants.
Female anopheles mosquito transmits malaria by biting an infected person then biting a healthy person. The parasites are transmitted from the infected to the healthy person through the bite.
Plasmodium attack RBC and the liver of humans. Incubation period 8-10 days.

Symptoms

Fever and shivering
Headaches
Pain in the joints and sometimes allover the body.
Enlarged spleen and liver.
Anaemia
Loss of appetite
Profuse sweating punctuated by chilis and shivers.

NB sometimes plasmodia parasites cause a more severe and fatal form of malaria by entering the brain cells. This causes cerebral malaria which causes mental disorders.

Adaptive characteristics

The parasites are not digested in the stomach of the mosquito.
Plasmodium is able to enter the RBC and reproduce within haemoglobin.
Some parasites mutate and become resistant to some of the drugs used for treating malaria.

Prevention and control

Take preventive anti-malaria drugs especially when travelling to malaria-prone areas.
Treat patients using anti-malaria drugs.
Sleep under mosquito net which has been treated using anti-malaria medicine.
Apply mosquito repellant cream to the body.
Control the vector by:

-Spraying insecticides to kill mosquitoes.

-Draining mosquito breeding places such as pools, broken pots and tins.

-Introducing fish into the ponds to feed on mosquito larvae.

-Spraying oil onto the surface of stagnant water inorder to kill mosquito larvae.

-Clearing bushes around homesteads.

Amoebic dysentery

Cause: Entamoebahitolytica
Mode of transmission
Transmitted through contaminated water and food hence termed as water-borne disease.
The protozoa are spread by houseflies. The protozoa live in the human intestines causing damage to them. They cause traces of blood to appear in the faeces.
Incubation period is 21-28 days.

Symptoms

Diarrhoea
Faeces have traces of blood.
Abdominal pains
vomiting
fever

Adaptive characteristics

the parasites is able to feed on the digested food of the host;
it resist digestion by the enzymes of the host.
They form a cyst

Prevention and control

Treat patient using anti-protozoa drugs.
Destroy vectors using insecticides.
Proper treatment and disposal of sewage.
Boil drinking water.
Cook food properly
Proper food storage
Clean vegetables and fruits in treated water before eating them
Parasitic worms

Schistosomiasis (bilharzia)

It’s caused by a blood fluke referred to as schistosome. there are various species of schistosome i.e.

–Schistosoma mansonii

-Schistosoma japonicum

-Schistosoma haematobium

Mode of transmission

Schistosoma eggs are passed from an infected person to a healthy person through urine or faeces which are discharged into the water.
The eggs hatch into larvae which enter an intermediate host.e.g snail
The larvae live the snail and live into the water where they penetrate the human being through the skin.

Effects of the parasite on the host

Presence of blood in urine.
General body weakness.
Pain in the lower abdomen.
Itchy skin.
Damage of liver and kidney

Adaptive characteristics

Ability to tolerate low oxygen concentration in the tissues of the urinary bladder.
The parasite has suckers for attachment so that they are not dislodged
The parasite has 2 host i.e. primary host(human being) and secondary host(snail) thereby increasing their chances of transfer to several host
The cercariae larvae and eggs of the parasite has glands that secret lytic enzymes which soften tissues to allow more penetration into the host
Some larval forms e.g. cercariae are encysted and can remain dormant and viable until they come into contact with the human being
The adult worm in blood produces chemical substances which protect it against the host defense mechanism
They worm are of separate sexes. The male forms a gynecophoric canal in which it carries the female. This ensures that eggs produced by the female are fertilized before they are shed into the blood vessels
Prevention and control
People should ware protective shoes and clothes and avoid walking barefooted in swampy areas.
Treatment using anti-schistosomiasis drugs
Use molluscicides to eradicate snails
Do not bath or stand in stagnant water
Boil water used for domestic purposes
Proper treatment and disposal of sewage

Ascaris lumbricoides

It’s a parasitic roundworm which belongs to the phylum nematode (roundworms)
Its characterized by a brownish yellow colour with mouth parts having three lips

Mode of transmission

Its transmitted through contaminated food and water

Effects of parasite on host

General nourishment and tendencies to have a large appetite because the digested food is consumed by the parasite in the intestine
The worms block the intestines thus interfering with digestion, also due to intestinal blockage victims develop large round stomachs.
The worms my move towards the nasal passages and interfere with breathing
Pneumonia my develop due to weakened lungs
Abdominal discomforts
The parasite produces toxic substance in a hosts body

Adaptive characteristic

It has a hard outer pellical that resist the digestive enzymes of the host
The worms tolerate low oxygen concentration in the ileum
They lay many eggs to ensure survival of the species
Eggs are covered by cyst which resist the enzymes of the host
The worm uses its lips to suck digested food from the host
The worm produces anti-enzyme to counter the enzymes the host
It has 2 hosts; human beings and pigs. This ensures that it always has a ready hosts for survival
It has a muscular pharynx through which it sucks digested food from the hosts intestine into its own gut

Prevention and control

Drugs can be used to kill worms
Boil drinking water
Proper use of toilets and latrines
Proper treatment and disposal of human waste
Cook food thoroughly before eating it
Practice personal hygiene